.
 

Special Features

  • Click on for easy installation and removal.
  • Available in Full overlay, Half overlay and Inset.
  • Max. Opening- 105 °
  • Max. shutter size - 34" x 22" (850 mm x 550 mm) for 2 hinges.
  • Shutter Thickness - 16 to 19 mm.
  • Shutter Cavity Ø35 mm; 12 mm deep. cavity 4 mm from edge.
  • Finish - Nickel Plated.

 

Specifications

  Item Code Nos. 'A'mm
  Overlay HC 1 34
  Half Overlay HC 2 39
  Inset HC 3 55

 

 

 

 

 
 
 
 
 

Fitting Instructions

  1. Drill out the cavity in the shutter as per the dimension in Fig. 1, using the 'ebco' drilling jig. Do not chisel.
  2. Fit the cap into shutter cavity and screw on the hinge at right angle to the edge of the shutter.
  3. Mark holes in the cabinet for mounting plate as per Fig. 2 and screw on the mounting plate.
  4. Now, align the shutter with the cabinet and click on the hinge onto the mounting plate. Any play or gap in cabinet can be adjusted in
    the bracket.
  5. By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.
     

 
 
 
 
 

Caution

For efficiency and durability.

  1. To avoid damage to hinge do not force door to exceed 105°.
  2. The hinge must not be hammered.
  3. Hinges must be parallel.
  4. Do not apply paint or polish.