Special Features

• Full extension of drawer provided.
• Slide latches and wheel catches provided on both sides to prevent the slides from getting disengaged while working.
• Inner Slide has Bottom Mounting.
• Screw holes as per System 32.
• Lateral guiding provided.
• 25 kgs load capacity.
• Ideal for kitchen baskets where full extension of drawer is necessary.

Specifications

Fitting Instructions

1. To install Full Extension Drawer Slide a 12.7mm (1/2") gap per side is required between cabinet and drawer. A total of 25.4mm ( 1") for both sides (Refer fig. 1).
2. Fit the outer slide onto the inside of the cabinet (Refer Fig.2).
3. Assemble the intermediate slide with the outer slide and slide it forward till it stops (Refer fig. 3).
4. Fit the inner slide onto the drawer. Make sure the slide latches (red color) is pulled forward. (Refer fig. 4B).
5. Slide the inner slide with the drawer into the intermediate slide (Refer fig. 5). Move the slide latch backward to the locked position (Refer fig 4A).
6. For removal of drawer, move slide latches (Red color) forward. The drawer can now be tilted and removed.
7. Slides should be fitted parallel to each other and screws tightened fully, to avoid gaps or interference with wheels.

Caution

For efficiency and durability,

1. Side gap of 12.7 mm (1/2") per side is most important.
2. Fix slides parallel and at equal height.
3. Do not remove Red Latch.
4. Do not apply paint or polish.