Special Features

• Simplifies construction of drawer as it eliminates the sides of drawer.
• Saves Wood, Labour and Drawer space.
• Tilt & remove capability with guiding.
• 'Auto- Closing' of drawer.
• Front facia adjustment.
• Ribbed for strength.
• Precision rollers for smooth running.
• 25 Kgs. load capability.
• 'System 32' Compatible.
• Stopper prevents Drawer from falling.
• Available with 6 mm bottom track is easy to fit and helps in faster assembly, as it does not require screwing the bottom, using 6 mm board in place of 9mm or 12mm.

Specifications

Fitting Instructions

1. Side gap of 15 mm is required and acts as side panel of drawer. (Fig. 1)
2. 25 mm clearance from top edge of drawer required to tilt and remove drawer. (Fig. 2)
3. Fixed slide should be set by 2 mm for 'Auto-CLosing.' (Fig. 2)
4. Screws should be recessed to avoid fouling.
5. Fixed slides should be fitted parallel and at equal heights to each other.
6. Front facia is to be fitted into front brackets which have a 2 way adjustment for alignment.

Caution

For efficiency and durability.

1. Strictly maintain side gap of 15.5 per side.
2. Fix slides are parallel and equal height.
3. Do not apply paint or polish.