Special Features

• Simplifies construction of drawer as it eliminates the sides of drawers.
• Saves wood, labour, drawer space, time & cost.
• Full extension of drawer provided.
• Slide latches and wheel catches provided on both sides to prevent the slides from getting disengaged while working.
• Auto-closing of drawer.
• Front fascia adjustment.
• Ribbed for strength.
• Ideal for filing drawers where full extension of drawer is necessary.
• System-32 compatible.
• 25 kgs load capacity.

Specifications

Fitting Instructions

1. To install Full Panel Full Extension Drawer Slide a 15.5mm gap per side is required between cabinet and drawer. A total of 31 mm for both sides (Refer fig.1).
2. Fit the outer slide onto the inside of the cabinet (Refer fig.2). Leave 6mm from the front edge.
3. Assemble the intermediate slide with the outer slide and slide it forward till it stops (Refer fig.3).
4. Complete the drawer by adding front, back and bottom panels to the Full Panel. Make sure the slide latches (red color) is pulled forward (Refer fig.4B).
5. Slide the full panel into the intermediate slide (Refer fig.5). Move the slide latch backward to the locked position (Refer fig.4A).
6. For removal of drawer, move slide latches (Red color) forward. The drawer can now be tilted and removed. (Refer fig.4B).
7. Slides should be fitted parallel to each other and screws tightened fully, to avoid gaps or interference with wheels.

Caution

For efficiency and durability.

1. Side gap of 15.5 mm per side is most important.
2. Fix slides parallel and at equal height.
3. Do not apply paint or polish.