.
 

Special Features

  • A unique new way to assemble a drawer by clipping on a matching back panel.
  • This not only improves the look of the drawer but also saves valuable time during assembly and brings down cost.
  • Tilt and remove capability with guiding.
  • Autoclosing of drawer
  • Front facia adjustment.
  • Precision rollers for smooth running.
  • 'System 32' compatible.

 

Specifications

Code No. Height Depth Width Extention Max Load kgs Finish
FPQ 54-40-40 54 400 400 325 25 Powder Coated
Black, Brown & Ivory.
FPQ 54-40-45 54 400 450
FPQ 54-45-40 54 450 400 375
FPQ 54-45-45 54 450 450
FPQ 86-40-40 86 400 400 325
FPQ 86-40-45 86 400 450
FPQ 86-45-40 86 450 400 375
FPQ 86-45-45 86 450 450
FPQ 125-40-40 125 400 400 325
FPQ 125-40-45 125 400 450
FPQ 125-45-40 125 450 400 375
FPQ 125-45-45 125 450 450

 

Fitting Instructions

  1. Side gap of 15.5mm is required and acts as side panel of drawer (Fig.1).
  2. 25mm clearance from top edge of drawer required to tilt and remove drawer (Fig. 2).
  3. Fixed slide should be set by 2mm for 'Auto-Closing' (Fig. 2).
  4. Screws should be recessed to avoid fouling.
  5. Fixed slides should be fitted parallel and at equal heights to each other.
  6. Insert the Rear panel onto the Side panels through the key slot provided in the side panels (Ref. Fig.3).
  7. Place the bottom flap through the track provided in the Side panels and fix the front facia with the Bracket and insert the unit onto Fixed slides which are fitted internal sides of cabinet (Ref. Fig.4).
     
   
 
 
A
(mm)		 B
(mm)		 C
(mm)		 D
(mm)
54 71 52 32
86 103 84 64
125 142 123 96
 
 
 
   
 

Caution

For efficiency and durability.

  1. Strictly maintain side gap of 15.5mm per side
  2. Fix slides are parallel and at equal height
  3. Do not apply paint or polish