.
 

Special Features

  • Unique built in damping system allows to shutter to close in slow motion without banging.
  • Special cover plate provided.
  • Available in Full overlay, Half overlay & Inset.
  • Max. opening 105°
  • Max. Shutter size : 34'' x 22'' (850 mm x 550 mm) for 2 hinges
  • Shutter Thickness : 16mm to 19mm.
  • Shutter cavity : Ø35 mm, 12 deep, cavity 4 mm from edge.
  • Finish : Nickel Plated.

 

Specifications

Code Nos. Model 'A'mm
HSM 1 FULL OVERLAY 36.0
HSM 2 HALF OVERLAY 40.0
HSM 3 INSET 58.0
 

Fitting Instructions

  1. Drill out the cavity in the shutter as per the dimensions in Fig. 1. Use 'ebco' Drilling jig. Do not chisel.
  2. Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter. The hinges must not be hammered.
  3. Make hole in the cabinet for mounting plate as per Fig. 2 and screw on the mounting plate.
  4. Now, align the shutter with the cabinet and click-on and screw the hinge on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
  5. By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure..
     

 
 
 
   
 

Caution

For efficiency and durability.

  1. To avoid damage to hinge, do not force door to exceed 105°.
  2. Do not apply paint or polish.
  3. Hinges must be parallel.
  4. The hinges must not be hammered.