.
 

Special Features

  • Available in Full overlay, Half overlay & Inset.
  • Max. opening: 100°.
  • Max. Shutter size: 24"x18"(600mm x 450mm) for 2 hinges.
  • Shutter Thickness: 12mm to 18mm.
  • Shutter cavity:Ø26mm,10mm deep,cavity 4mm from edge.
  • Finish: Nickel Plated

 

Specifications

Code Nos. Model 'A'mm
HM 1 FULL  OVERLAY 38.0
HM 2 HALF OVERLAY 38.0
HM 3 INSET 59.0
 

Fitting Instructions

  1. Drill out the cavity in the shutter as per the dimensions in Fig. 1.
  2. Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter. The hinges must not be hammered.
  3. Mark hole in the cabinet for mounting plate as per Fig.2 and screw on the mounting plate.
  4. Now, align the shutter with the cabinet and slip-on and screw the hinge on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
  5. By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.
     

 
 
 
   
 

Caution

For efficiency and durability.

  1. To avoid damage to hinge, do not force door to exceed 100°.
  2. Do not apply paint or polish.
  3. Hinges must be parallel.
  4. The hinges must not be hammered.