.
 

Special Features

  • Easy to pullout, pull release for disconnect.
  • Ball retainer detent for drawer easy re-install.
  • Hold-in detent.
  • Side space adjustable tabs and non-handed.
  • 32mm hole pattern.

 

Specifications

Item code SideLength
mm 		Extension
mm		 Gap/Slide
mm		 Max. Load
Kgs.		 Finish
MTDS 35 350 350 12.7 25 Bright Zinc Plated
MTDS 40 400 400
MTDS 45 450 450
MTDS 50 500 500
 

Fitting Instructions

  1. Side gap required is 12.7mm (½”) per side (Ref. Fig. 1).
  2. Fix the outer (fixed) slides to the cabinet. Access to holes can be got through slots in intermediate slide (Ref. Fig. 1).
  3. Press latch and remove the inner slide (Ref. Fig. 2).
  4. Slides should be fitted parallel and screws tightened fully to avoid gaps.
  5. Fit inner slide onto the outside of the drawer. (Ref. Fig. 1).
  6. Now, slide the drawer with inner slide fitted onto the intermediate slides on the cabinet.
     
 
 

Caution

For efficiency and durability,

  1. Side gap required is 12.7mm per side is most important.
  2. Fix slides parallel and at equal height.
  3. Do not apply paint or polish.
  4. Do not let saw dust enter in to the slides