.
 

Special Features

  • Full extension.
  • 30 mm stroke of Auto - Closing.
  • Pull force 2.5 kg.
  • Non-handed Disconnect Release.
  • 45 kg / 100 Ibs. loading at 18".
  • Electro-Zinc plated.

 

Specifications

Code Nos. Size
mm		 Length
mm 		Extension
mm		 Max. Load
Kgs
P-STDS-30-AC 300 300 305 25
P-STDS-35-AC 350 350 356 35
P-STDS-40-AC 400 400 406 40
P-STDS-45-AC 450 450 457 45
P-STDS-50-AC 500 500 508 45
P-STDS-55-AC 550 550 559 40
P-STDS-60-AC 600 600 610 40

 

Fitting Instructions

  1. To install Ball bearing slide, 13.0 to 13.6 mm side gap per side is required between cabinet and drawer. (Refer Fig. 1)
  2. Fit outer (fixed) side onto the inside of the cabinet, access to holes can be got through slots in intermediate slide.
  3. Slides should be fitted parallel and screws tightened fully to avoid gaps.
  4. Fit inner slide onto the outside of the drawer.
  5. Now slide the drawer with inner slide fitted on to the intermediate slides on the cabinet till the latch will automatically engage.
     
Drilling Diagram for Cabinet
 
 
 
 

Caution

For efficiency and durability,

  1. Strictly maintain 13.0 to 13.6 mm side gap.
  2. Fit slides parallel and at equal heights
  3. Do not apply paint or polish.
  4. Do not saw dust enter into the slides.