.
 

Special Features

  • Full extension
  • Push-rebound function built in slide, easy for installation.
  • Non-handed Disconnect Release.
  • 45 kg / 100 Ibs. loading at 18 ".
  • Rebound 2" - 5" when drawer is pushed.
  • Electro-Zinc plated.

 

Specifications

Code Nos. Size
mm		 Lenght
mm 		Extension
mm		 Max. Load
Kgs
P-STDS-40-PO 400 400 406 40
P-STDS-45-PO 450 450 457 45
P-STDS-50-PO 500 500 508 45

 

Fitting Instructions

  1. To install ball bearing slide, 13.0 to 13.8 mm side gap per side is required between cabinet and drawer. (Refer Fig. 1)
  2. Fit outer (fixed) slide onto the inside of the cabinet, access to holes can be got through slots in intermediate slide
  3. Slides should be fitted parallel and screws tightened fully to avoid gaps.
  4. Fit inner slide onto the outside of the drawer.
  5. Now slide the drawer with inner slide fitted on to the intermediate slides on the cabinet till the latch automatically engages.

 
     
Drilling Diagram for Cabinet
 
 
     
 
Size
mm		 Slide
Length		 Max. drawer
width Suggested
400 400 600
450 450 650
500 500 700
     
 
 

Caution

For efficiency and durability :

  1. Strictly maintain 13.0 to 13.8 mm side gap.
  2. Fit slides parallel and at equal heights.
  3. Do not apply paint or polish.
  4. Do not let saw dust enter into the slides.