.
 

Special Features

  • 30 mm stroke of Soft - Closing
  • Pull force 3.2 - 3.5 kg
  • Soft-closing function built in slide, easy for installation.
  • Non-handed Disconnect Release.
  • 45 kg / 100 Ibs. loading at 20".
  • Electro-Zinc plated.

 

Specifications

Code Nos. Size
mm 		Lenght
mm 		Extension
mm		 Extension Loss
mm 		Max. Load
Kgs
P-STDS-30-SC 300 300 238 -62 20
P-STDS-35-SC 350 350 305 -45 25
P-STDS-40-SC 400 400 378 -22 35
P-STDS-45-SC 450 450 430 -20 40
P-STDS-50-SC 500 500 482 -18 45
P-STDS-55-SC 550 550 533 -17 40
P-STDS-60-SC 600 600 584 -16 35

 

Fitting Instructions

  1. To install ball bearing slide, 13.0 to 13.8 mm side gap per side is required between cabinet and drawer. (Refer Fig. 1)
  2. Fit outer (fixed) slide onto the inside of the cabinet, access to holes can be got through slots in intermediate slide
  3. Slides should be fitted parallel and screws tightened fully to avoid gaps.
  4. Fit inner slide onto the outside of the drawer.
  5. Now slide the drawer with inner slide fitted on to the intermediate slides on the cabinet till the latch will automatically engage.
     
Drilling Diagram for Cabinet
 
 
 
 

Caution

For efficiency and durability :

  1. Strictly maintain 13.0 to 13.8mm side gap.
  2. Fit slides parallel and at equal heights.
  3. Do not apply paint or polish.
  4. Do not let saw dust enter into the slides.