|
 |
| . |
| |
- This new drawer slide system has a unique design with chrome steel ball bearings and rollers for long life, smooth working and two dimensional guiding.
- Easy to fit by just pushing the drawer in and come with a special Release Clip with built-in Fascia Adjuster.
- Has a spring loaded auto-closing feature.
- System 32 compatible
- Saves space due to reduced side gap.
| QSDS 25 |
255 |
134 |
250 |
265 |
4.0 |
30 |
Zinc
plated |
| QSDS 30 |
305 |
184 |
300 |
315 |
| QSDS 35 |
355 |
234 |
350 |
365 |
| QSDS 40 |
405 |
284 |
400 |
415 |
| QSDS 45 |
455 |
334 |
450 |
465 |
| QSDS 50 |
505 |
384 |
500 |
515 |
| QSDS 55 |
555 |
434 |
550 |
565 |
| QSDS 60 |
605 |
484 |
600 |
615 |
|
|
| |
- Side wall thickness of drawer should not exceed 16mm Max. and bottom extension of side should not exceed 10mm max. (Refer fig. 1)
- Drill hole Ø6mm required at the rear of drawer to anchor the rear end of slides (Refer fig. 2)
- Release clips to be fitted to the drawer in front of the fascia. (Refer fig. 3)
- Mounting brackets of slide to be fitted parallel and at equal height inside the cabinet leaving 5mm from the front edge (Refer fig. 4)
- Push Drawer onto slide and automatically locks onto the slides. (Refer fig. 5)
- Fascia can be adjusted by sliding the adjuster.
|
|
|
|
