|
 |
| . |
| |
- New smooth, silent roller system.
- Right side pair has lateral guiding.
- Left side pair has side gap adjustment.
- Tilt and remove of drawer.
- Stopper to prevent drawer from falling.
- New "Auto-Closing" feature of drawer.
- "System 32" compatible.
- Ribs provided for strength.
- Load capability - 20 kgs
| SMDS 25 |
250 |
160 |
12.7
(1/2") |
20 |
Powder
Coated
Black,
Brown
andlvory |
| SMDS 30 |
300 |
210 |
| SMDS 35 |
350 |
260 |
| SMDS 37 |
375 |
285 |
| SMDS 40 |
400 |
310 |
| SMDS 45 |
450 |
360 |
| SMDS 50 |
500 |
410 |
| SMDS 52 |
525 |
435 |
| SMDS 55 |
550 |
460 |
| SMDS 60 |
600 |
510 |
| *SMDS 65 |
650 |
560 |
15.6
(5/8") |
| *SMDS 70 |
700 |
610 |
| *SMDS 75 |
750 |
660 |
For Side Mounting Bottom Silde - EURO add 'E-' before the existing codes.
* Not available in EURO series. |
|
|
| |
- Side gap of 12.7 mm (1/2") per side required (Refer fig. 1).
- Side gap of 15.6 mm (5/8") per side is required for 650, 700 and 750 mm.
- 25.4 mm (1") clearance from top edge of drawer required to tilt and remove drawer (Refer fig. 2).
- Fixed and moving slide should be equally offset by 2 mm for Auto-Closing (Refer fig. 2).
- Recess screw heads to avoid interference.
- A set of slides must be fitted parallel and at same heights to each other.
|
| |
|
|
Drilling Diagram for Cabinet
|
| |
 |
|
 |
| |
|
|
For efficiency and durability.
- Side gap of 12.7 mm (1/ 2") and 15.6 mm (5/ 8") per side is most important.
- Fix slides parallel and at equal height.
- Do not apply paint or polish.
|
|
|
|
|
