|
 |
| . |
| |
- New Auto closing feature.
- Precision ball bearing.
- Full extension of drawer.
- Load capacity 35 Kgs.
- Direct fitting from front.
- Removable drawer with Latch.
- System 32 installation.
| STDS 25-AC(I) |
250 |
245 |
12.7
to
13.0 |
35 |
White,
Black,
MG Gray
Zinc
Plated |
| STDS 30-AC(I) |
300 |
295 |
| STDS 35-AC(I) |
350 |
345 |
| STDS 40-AC(I) |
400 |
395 |
| STDS 45-AC(I) |
450 |
445 |
| STDS 50-AC(I) |
500 |
495 |
| STDS 55-AC(I) |
550 |
545 |
| STDS 60-AC(I) |
600 |
595 |
| STDS 75-AC(I) |
750 |
745 |
|
|
| |
- To install sleek telescopic drawer slide 12.7 to 13.0mm side gap per side is required between cabinet and drawer. (Refer Fig. 1)
- Depress latch and remove the inner slide. (Refer Fig. 2)
- Fit outer (fixed) slide onto the inside of the cabinet, access to holes can be got through slots in intermediate slide.
- Slides should be fitted parallel and screws tightened fully to avoid gaps.
- Fit inner slide onto the outside of the drawer.
- Now slide the drawer with inner slide fitted on to the intermediate slides on the cabinet till the latch will automatically engage.
|
| |
|
For efficiency and durability,
- Strictly maintain 12.7 to 13.0mm side gap.
- Fit slide parallel and at equal heights
- Do not apply paint or polish.
- Do not saw dust enter into the slides.
|
|
|
|
