.
 

Special Features

  • Available in Full overlay, Half overlay and Inset.
  • Max. Opening- 105 °
  • Max. shutter size - 34" x 22" (850 mm x 550 mm) for 2 hinges.
  • Shutter Thickness - 16 to 19 mm
  • Shutter Cavity Ø35 mm; 12 mm deep. cavity 4 mm from edge.
  • Finish - Nickel Plated.

Hinge Hole Cover:

  • Cap to cover the Ø35mm drilling made for maxi connectors, hinges, etc.
  • Easy to fit & remove and also reusable.

  

Specifications

Code Nos. Model 'A'mm
E-HS 1#* FULL OVERLAY 36.0
E-HS 2#* HALF OVERLAY 36.0
E-HS 3#* INSET 56.0
* Add M1 after the existing code for Euro Hinges with Four Hole Mounting Plate
# Add D1 after the existing code for Euro hinges with Dowel.

Hinge Hole Cover
Code Nos. Size Finish
HHC 35 Ø35 Frosty White
 

Fitting Instructions

  1. Drill out the cavity as per the dimension in Fig. 1, using the "ebco" drilling jig. Do not chisel.
  2. Fit the cap into shutter cavity and screw on the hinge at right angle to the edge of the shutter.The hinges must not be hammered
  3. Mark holes in the cabinet for mounting plate as per Fig. 2 and screw on the mounting plate.
  4. Now, align the shutter with the cabinet, slip-on and screw the hinge on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
  5. By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.
 
 

Caution

For efficiency and durability.

  1. To avoid damage to hinge, do not force the door to exceed 105°.
  2. Do not apply paint or polish.
  3. Hinges must be parallel.
  4. The hinges must not be hammered.