Special Features

• Available in Full overlay, Half overlay and Inset.
• Max. Opening- 105 °
• Max. shutter size - 34'' x 22'' (850 mm x 550 mm) for 2 hinges.
• Shutter Thickness - 16 to 19 mm
• Shutter Cavity: ø35, 12mm deep, 4mm from edge.
• Finish - Nickel Plated, Powder Coated.

Specifications

Fitting Instructions

1. Drill out the cavity as per the dimension in Fig. 1, using the 'ebco' drilling jig. Do not chisel.
2. Fit the cap into shutter cavity and screw on the hinge at right angle to the edge of the shutter.
3. Mark holes in the cabinet for mounting plate as per Fig. 2 and screw on the mounting plate.
4. Now, align the shutter with the cabinet, slip on and screw the hinge onto the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
5. By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.

Caution

For efficiency and durability.

1. To avoid damage to hinge do not force door to exceed 105°.
2. The hinge must not be hammered.
3. Hinges must be parallel.
4. Do not apply paint or polish.